1. Here you will see the uptime of your hub.
2. Here you start and stop your hub

1.Hub control

Autostart
Lock hub
Prompt on shutdown
Minimize to tray
Userlimit	What ever you think is enough
Workpace	Normal
Port(s)	411 is default. to separate use ; to use more then one port (411;23;1411)

2.Here you will be abel to give you hub a name and the "bot" in your hub.
The first box will name you hub. here it will be called The YnHub demo hub.
The second box tells what you will call your bot, in this case -YnHub-

3. Hub address, description, language, saves, convert.
In the first box you add your hub address, it can be a DNS or your external IP
The second box you can type a short description of your hub. This part will be visible in the hublist later on if you choose to register your hub.
Core language will change the language in your hub, but it will not change the language in the GUI. You can get the different languageshere.
Mark the auto save box and set it to 60 minutes, then you wont need to press the save button every time you make a change. But remember to press the save button before a reboot of the hub, this is where most people do wrong when they have made a reboot and when the hub is started again, some accounts have disappeared.
Now you are done here, lets get going to the next step.

1. Here you choose if you want to use the different redirects or not by marking the box.

2. Here you add the addresses you want the user should be redirected to.

This will be all up to you, who you want to redirect or not.
If you want multiple addresses on hub full for an example. then separate with a pipe. on.hub.full1:411|on.hub.full2:411| and so on then the users will be sent to random addresses.
But you don´t need to type in a address, you can write what ever you want.
On banned example. We don't want you in here.Your ass is banned in this hub so fu** off.

These settings will send a feed message to a chat-room you have chosen. It will be explained further down.

1. Protocol notifications (before kicking)

Notify invalid key (if kicking)
Notify invalid MyINFO
Notify invalid private message
Notify invalid mainchat message
Notify invalid search result (SR)
Notify incorrect IP in connection attempt
Notify invalid passive connection attempt
Notify incorrect characters in nick

2. Spam notifications

Notify on MyINFO spam
Notify on search spam
Notify on mainchat spam.
Notify on private message spam
Notify on nicklist spam
Notify on junk data spam

3. Other notifications

Suppress client kick message in mainchat
Notify operators on kick in mainchat
Notify operators on ban in mainchat

4. Feed

Use the feed command if supported
Save feed to disk
Feed name when sent to a chatroom	Type any name you want

5. Miscellaneous

Notify incorrect pass after x times

You can leave this step if you like. and go to the text command on this page instead.

1. Here you will se all of your added text commands

2. Here you are abel to choose edit level, receive level, access level. who you want the command to be broadcast to, and so on.

3. Here you set a name for your command. It´s the name that triggers the text in the hub. +trigger

4. Here you type what ever should be in the command.

1. General security - Mark these options

Kick user if key is invalid
Check sender IP on Search and connectToMe
Perform DNS lookup -
Check data before lock

2. Maintenance & Timeouts - Mark all these options and leave the time value as it is.

Handshake timouts
Drop non responding
Temporary ban on kick

3. Share trace - Mark all these options and leave the time value as it is.

Enable share trace
Notify on share update
Autoprune

4. Auto bans - Mark all these options and leave the time value as it is.

Ban on kick no
Ban on incorrect pass no

5. Spam control - mark all these options and leave the time values as they are.

New MyINFOs	Make this one "grayed "
Searching	Make this one "grayed "
Mainchat	Not grayed
Private messages	Make this one "grayed "
Nicklist	Make this one "grayed "
Junk data	Not "grayed"
Junk data direct kick	Not "grayed"
Max spam warnings

You click twice in the box to make the box grayed.

Nick max length
Search max length
MyINFO max length
Mainchat length
Private message max length

2.

Allowed nick characters
Here you select what chars you will let your users to have in their nicks.
so just mark the box on which characters you will allow in the hub.
But you can leave this option as it is for now.

Force reply to PM
Integrated command visibility

Force reply to PM

Maxhits on hub integrated commands searches
Autosend own userIP on login

Mark every chatroom and change the welcome message if you like.and only have the show feed box marked on the OP-chat

1. Here you will see all you different chat-rooms

2. No need to change anything here, but you can type in a welcome message if you like.

3. No need to change anything here either.

Show chatroom as operator
Show feed message	Just have this option marked for the OP-chat

1.
Here you will se all available hublists you can get registered at.

1. Here you are abel to choose how you should store your user stats , you have to enable this feature or you wont be abel to use the !ui <nick> in the hub.

Type
Prune

2. MySQL

No need to change anything unless you have MySQL on your computer, this has it´s advantages. When you reboot the hub you wont lose your user stats as you would if you stored it locally.

Require an account or register (reg only)	Mark this if you want a private hub .
Enable register (allows users to register their nicks)	mark this, If you want your users to register themselves (+regme +unregme)
Enable ISP/IP check
Allow IP's not found in ISP list
Use case sensitive prefix validation
Required prefix
Min share size
Min slots
Max slots
Max share size
Max hubs
Slot ratio
Allow "tag-less" clients to bypass hub/slot restrictions
May connect using passive mode

Required password:

1. Here you will see all of your different accounts.

2. Here you choose what level and what the account should be named.

3. Here you choose what the different accounts can do. I will go through everyone here and we shall concentrate on the owner, OP and VIP accounts.

3.1	Owner	OP	VIP
Profile settings
May use hub commands
Is operator
May see hidden users
My hide self
Can enter even if hub is full
Force hide share
May hide share
Connection restrictions
Set min share
Set max share
Set min slots
Set max slots
Set slotratio
Hub control
Save settings
Change userlimit
Set Topic
Redirect all
Set Workpace
Lock hub
Lock mainchat
Information
Hub info
Userinfo
IP info
Nick info
Traffic info
Traffic stats

3.2	Owner	OP	VIP
Accounts
Add account
Remove account
List account
Set profile
Set required IP/IP range
Show required IP/IP range
Set comment
Set expire date
Set owner
Set password
Show password
Show profiles
User control
Block user
Redirect user
Drop user
Kick user
Ban nick
Ban IP/IP range
Ban DNS
Ban client
Tempban
Mute user
Luarize user
Kennylize user

3.3	Owner	OP	VIP
ISPs
Add ISP
Remove ISP
List ISP
Set min share
Set max share
Set max hubs
Set min slots
Set max slots
Set slotratio
IP on ISP's
Add IP to ISP
remove IP from ISP
Show IP's on ISP

3.4	Owner	OP	VIP
Redirects
Hub full
Incorrect ISP/IP
Low share
High share
Reg. only
Passive
No tag
High hubs
Low slots
High slots
Low slot ratio
Banned
Miscellaneous
Admin chat rooms
Admin text files
Admin registered
Use say command
Use MC command
Use warn command
Use inform
Use PM command
Use OPM command

3.5	Owner	OP	VIP
Privileges ( overrides )
Flood check
PM length limit check
Mainchat length limit check
IP check on search/connect
Nick check in PM/MC
Bypass ISP/IP check
Override default/ISP tag restrictions
Nickban
IP/IP range ban
DNS ban
Client ban
Tempban
Min share
Min slots
Max slots
Max sharesize
Max hubs
Slot ratio
Allow"tag-less" clients to bypass hub/slot restrictions
May connect using passive mode

3.5	Owner	OP	VIP
Protocol access
Search in active mode
Search in passive mode
Send mainchat messages
Send private messages
Connect in active mode
Connect in passive mode
Feature access
May access UserIP
May access UserIP2
May access MCTo
Master overrides
Cannot be kicked
Cannot be dropped
Cannot be redirected
Feed
Receive feed
Receive action feed
Receive kick feed
Receive event feed
Receive GUI feed
Receive error feed

3.6	Owner	OP	VIP
Enable join announcement

In the content box you can type what ever you want.
Example: Here is the almighty <nick> his profile level is: <profile>
Or just leave it empty if you don´t want it to announce when someone gets into the hub.

1. Here you will see all your added accounts

Lets se if we can add an account for you here.

2. Type a nick you want. example [OP]kalle , then choose a password you want.

3. On profile you choose Owner and let the owner box stay as it is.
In IP patter you can choose your Internal IP if you like, then nobody then you can enter on that account. but you wont be abel to enter from a different machine if you are at a friend and so on.
So if you don´t want that leave it blank.
The comment field you can leave blank to.
The greeting box will send a private message to you when you log into the hub. Only you will be abel to se it. Then hit the save as button.

1. Enable register. Let your user to reg them self in the hub. The command is +regme <password> and +unregme

2. Here you can search among the self registered users. If you type an asterix * then it will list all registered users, or just search on nick.

3. Here your registered users should be listed when you do a search

Well this should be it, now you should have a working hub. try and log in on the hub by connecting to you local IP. 127.0.0.1:411 if you haven't changed the port number in settings, with your chosen nick and password.
All you have to do now is to open up the port you did choose in settings on your router, firewall.
Howe do i do that? well look in your manual for your router/firewall, but here is a good page you can look at if you have a router. http://portforward.com/routers.htm. To check so you have forwarded the right port in your router/firewall go to this page and test it. http://www.canyouseeme.org/